Applications:
Storage Tanks, Ship-building, vehicles, pipes, galvanized plants, bridges, heavy equipment, building structure, etc.
Characteristics:
VOLTAWELD V-6010 is designed for all positions deep penetration electrode with a spray arc, flat bead and thin brittle slag. Weld deposit has high tensile strength, ductility and is of X-ray quality. Excellent weldability in vertical and overhead positions. Deposition efficienct is higher than conventional types due to iron powder in the coating.
Notes on Usage:
(1) Use DC reverse polarity (DC+) current. Maintain a short to medium arc. Hold electrode perpendicularly to work surface and slightly inclined in direction of travel, keeping size of molten pool small. Clear each bead well before applying the next. Vertical welding can be done starting from the top or the bottom as the work requires. In overhead welding best results are obtained by the multiple beads method.
(2) Dry the electrodes at 60-70 degrees C for 30 minutes before use.
Typical Chemical Composition of Weld Metal (%):
C |
Mn |
Si |
P |
S |
0.10 |
0.50 |
0.20 |
0.13 |
0.012 |
Typical Mechanical Properties of Weld Metal:
Yield Point
N/mm2 (Kgf/mm2) |
Tensile Strength
N/mm2 (Ksi) |
Elongation
(%) |
Impact Value
Deg C, J (Deg F, Ft-lbs) |
420 (61) |
500 (73) |
27 |
-29, 85 (-20, 63) |
Size and Recommended Current Range (DC +):
Diameter (mm) |
2.5 |
3.2 |
4.0 |
5.0 |
Length (mm) |
350 |
350 |
350 |
350 |
Ampere |
Flat |
50-80 |
80-110 |
100-150 |
140-200 |
V & OH |
30-70 |
50-100 |
70-120 |
120-180 |
Welding Positions:
Flat, Fillet, Vertical Up, Horizontal, Overhead, Vertical Down
Approvals:
ABS
Packing:
20 Kg corrugated box, with 4 units of 5 Kg shrinked plastic wrapped paper boxes inside.
Special requests on packing are accepted. |
