APPLICATION:
For surfacing of overlays having good abrasion resistance in combination with scaling resistance. E.g. exhaust gas systems, rollers and valve faces.
TYPICAL ANALYSIS OF FILLER WIRE:
C |
Si |
Mn |
Cr |
Ni |
Mo |
|
|
|
0.28 |
0.38 |
0.43 |
13.12 |
0.40 |
0.14 |
|
|
|
TYPICAL ALL WELD MECHANICAL PROPERTIES:
Yield Point
N/mm2 (Ksi) |
Tensile Strength
N/mm2 (Ksi) |
Elongation
% |
Impact Value
Deg C, J (Deg F, Ft-lbs) |
|
|
|
|
AS WELD HRC: 49-53
600 deg C x 2 Hr HRC: 33-36
TIG DIAMETERS: 1.6, 2.0, 2.5, 3.2, 4.0 mm
TIG PACKING: 5KG per plastic container, 4 plastic containers per master carton box
MIG DIAMATERS: 0.6, 0.8 0.9, 1.0, 1.2, 1.6 mm
MIG PACKING: 15KG per spool, then placed in corrugated box
Small spool for 0.6 and 0.8mm available (6 Kg per spool) |
