APPLICATIONS
For welding alloys with similar composition in wrought or cast forms.
INSTRUCTION FOR WELDING
(1) Keep the arc length as short as possible.
(2) The welding current should be used as low as possible.
Typical Chemical Composition of Weld Metal (%):
C |
Si |
Mn |
Cr |
Ni |
Nb & Ta |
Mo |
0.05 |
0.4 |
2.02 |
20.09 |
34.54 |
0.68 |
2.34 |
Typical Mechanical Properties of Weld Metal:
Tensile Strength
N/mm2 (Ksi) |
Elongation
(%) |
582 (84) |
39 |
Size and Recommended Current Range (AC/DC +):
Diameter (mm) |
2.5 |
3.2 |
4.0 |
5.0 |
Length (mm) |
300 |
350 |
350 |
350 |
Ampere |
Flat |
50-80 |
70-110 |
100-150 |
130-180 |
V&OH |
45-75 |
65-105 |
95-140 |
- |
Welding Positions:
FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
Packing:
EXPORT (1.6-2.5mm): 16 Kg corrugated box, with 4 units of 4 Kg plastic container.
EXPORT (3.2-5.0mm): 20 Kg corrugated box, with 4 units of 5 Kg plastic container.
LOCAL: 5Kg Special Paper Box with shrink wrapped plastic
Special requests on packing are accepted. |
